Skip to content

Realignment

How can this documentation be improved?

  • Clarify whether it makes sense to adjust the LiteBeam horizontally or vertically first.
  • Update to reflect realignment from BICAS to Tucson House, especially how to pick which sector router to connect to.
  • Incorporate a protocol for people to get their own login for the LiteBeam's admin interface.
  • Figure out what to do if someone needs to move the mount and update the cable run

This is a draft guide to help users and installers realign the LiteBeam device on a home rooftop with the supernode at Tucson House.

Overview

There are a few broad stages to the realignment process. Even if you get stuck, completing the previous stage will make it easier for others to help you finish the rest.

  • Gather materials: Get the materials you will need to complete the other steps. This includes physical things like a ladder, software and login information for the rooftop routers.
  • Use maps to find the supernode and check the line of sight: Before getting on your roof, use web maps to know where the supernode is located relative to your home. Optionally, check for any major obstructions using GIS software.
  • Physical check the line of sight: Climb on your roof and look for obstructions between the router and the supernode. Would the line of sight be better if the router were mounted at a different place on the roof?
  • Adjust the router for the best signal strength: Connect to your router's administrative interface to monitor the signal strength. Rotate the router to get the strongest signal and tighten everything down.